DUNLOP SHOWER WATERPROOFING KIT has been especially designed to make the job of waterproofing a shower area quick and easy. Used prior to fixing wall tiles, the kit ensures a watertight barrier preventing water penetration into water sensitive backgrounds such as plasterboard and may be applied to wall angles, corners, around pipe penetrations and structural fixtures. Waterproofing is strongly recommended prior to tiling in shower areas to ensure no water penetrates through to the wall and floor surface. It is suitable for use on a wide variety of surfaces including: concrete, cement:sand rendering, plaster, plasterboard, sand:cement screeds tile backer boards and moisture stable timber boards. Although designed for use with domestic showers it can also be used in other areas which require waterproofing. It is not recommended for use outside, in conditions of total water immersion e.g. pools, tanks or as a barrier to prevent ingress of water from the background, i.e. not designed as a damp proof membrane. It does not provide a wearing surface and must be used in conjunction with tiling.

• Contents

Kit Contains, 500ml Primer, 4.5kg Waterproof Coating, 10mtr 100mm Tape, 1mtr x 1mtr Matting

• Coverage

1 x 5kg Kit covers approx. 3.5m2 

• Preperation

Surfaces must be sound, dry, clean, sufficiently flat and free from dust, grease and other contamination. Any voids or gaps should be filled with suitable filler or sealant and allowed to dry. Cracks up to 1.5mm may be bridged with the enclosed DUNLOP WATERPROOFING TAPE and DUNLOP WATERPROOF COATING. The coating should not be used to level out irregularities.