Transform your outdoor space with the Essenza Porcelain Paving Pack, an elegant and cost-effective choice that combines style and resilience. These tiles, inspired by the gentle, earthy tones of natural grey and beige stone, create a warm and welcoming atmosphere ideal for garden patios or pathways.

Equipped with a slip-resistant R11 anti-slip finish and a textured stone effect, they ensure safety and enhance the beauty of any setting. Built to withstand various weather conditions, they are resistant to frost, chemicals, moss, and algae, maintaining their vibrant color and integrity over time. With dimensions of 600 x 600 x 20mm, each pack offers 60 tiles, covering 21.6 m, making them both practical and visually appealing.

• Dimensions: 600 x 600 x 20mm, 60 paving tiles
• Covers 21.6m
• Natural stone-inspired beige tone
• Slip-resistant R11 finish
• Frost and chemical resistant
• Fade-resistant colors, low maintenance
• Textured stone effect surface
• Perfect for outdoor patios and pathways

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.