Porcelain paving and weathered timbers come together in a unique blend of strength, durability, beauty and warmth: Pavestone Deckwood Crosswood Buff Porcelain Paving . It doesn't just look like wood it looks better. Plus its low-maintenance properties make it the ideal decking for projects big or small; from intricate herringbone patterns to classic checkerboard designs - let your imagination run wild!

• 32 paving tiles (1 pallet) cover approximately 11.33m2
• Nominal size: 1200 x 295 x 20mm
• Covers 11.33m2 per pallet (32 tiles)
• Anti-slip finish for safety in wet conditions
• Resistant to weather, chemicals, and colour fading
• Can be laid in various patterns for creative designs
• Easy to maintain and clean

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.