Pavestone Ivory Classic Porcelain Paving (900 x 600 x 20mm) is a budget-friendly option for transforming any garden patio or pathway. With its durable, slip-resistant surface and easy-to-clean qualities, it adds a touch of class to any outdoor space at an affordable price.

• Dimensions: 900x600x20mm
• Hard-wearing and slip-resistant surface
• Can be profiled for making steps or smooth edges for raised patios
• 1.9 paving tiles cover approximately 1.0m2
• 40 paving tiles (1 pallet) cover approximately 21.6m2
• R11 anti-slip finish for good grip in damp and wet weather
• Resistant to acid and alkali chemicals, moss, and algae
• Will not experience colour fading over time
• Nominal dimensions with minimal variation between tiles
• Always check batch number for minimal size variation

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.