Recreate a natural look in your outdoor space with Pavestone's Monviso Smooth Grey Porcelain Paving. Its sawn and honed (polished) sandstone design is virtually indistinguishable from the real thing, plus its high-quality Italian porcelain ensures beauty that lasts for years without any scrubbing required! Ensure safe footing on these tiles even when wet thanks to their R11 anti-slip finishing process which roughens the surface while preserving appearance - not to mention you can give them an edge profile of your choice for steps or raised patios!

• Nominal size: 900 x 600mm x 20mm
• Covers 21.6m2 per pallet (40 tiles)
• Hard-wearing and low maintenance
• R11 Anti-slip Finish for a good grip underfoot in damp and wet weather
• Resistant to weather changes, acid and alkali chemicals, moss and algae growth, and colour fading
• Rectified for minimal dimensional variation between tiles
• Actual tile dimensions may be up to 5mm less than stated nominal measurements, but variation between tiles in a batch will only be +/-2mm

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.