Please note that there is a 5 working day lead time for this product.

Transform your outdoor space into an elegant retreat with Essenza Porcelain Paving tiles. Designed to replicate the soft, earthy tones of natural stone, these tiles infuse your garden, patio, or pathway with warmth and sophistication.

The textured stone effect finish and square edge profile, combined with R11 anti-slip technology, offer both aesthetic appeal and enhanced safety. Constructed for durability, the tiles boast frost resistance and resilience against weather changes, preventing deterioration in freezing conditions. They withstand colour fading, acid, and alkali chemicals, maintaining a vibrant appearance free from moss and algae. Measuring 900 x 600 x 20mm, these tiles are ideal for patios and pathways, inspired by natural grey and beige tones.

• Size: 900 x 600 x 20mm
• Covers an area of 10.8 m
• Ideal for patios and pathways
• Textured stone effect with a square edge
• Slip-resistant surface; R11 anti-slip
• Frost and weather resistant
• Resistant to chemicals and fading
• Easy to maintain and clean

Please note: Porcelain paving is manufactured in batches, this means the colour and texture can vary by the batch. Ensure you mix tiles from each of the packs that are being laid. This means an overall tone will be achieved showing no colour discrepancies. If you lay paving using one pack at a time it can create visible colour differences.

It is also important to keep a note of the batch code of the porcelain, in the event you need more tiles. When laying the paving you will also need a flexible jointing grout, but ensure this does not dry on the surface of the tiles. Some porcelain paving tiles are rectified, rectified tiles ensure precise dimensions for seamless flooring, allowing for closer jointing to create a unified, uninterrupted surface. They must be laid on an MOT Type 1 or GSB aggregate sub-base, or over a geo-textiles covering. 

Tiles need to be set on a full wet mortar bed (40mm), using a 5:1 Sharp sand : cement ratio and the tiles should be cut with a circular Porcelain Cutting Blade (no teeth) using hand tools, or a table saw and water dust suppression.

Prior to laying the tiles, ensure you use a priming slurry, which needs to be applied to the underside of each paving tile.